Also, the installer should check that all pipes and fittings are fully spanner tightened and not dripping any water. Check around the rear and sides of the steam shower to see whether any water has escaped and reseal where necessary. Typically, it is not necessary to seal the top piece but this is left to the discretion of the installer. Use the handheld shower to spray water against the water jets, all acrylic/glass panel fixing holes and along the join of all adjoining panels.

Once sealant has been applied and allowed to dry, the steam shower should be tested for water tightness. Sealant should also be placed between the side panels and the tray to stop any water running along any seams and over the edge of the shower tray. Typically, you should now place a bead of white or clear sealant between the adjoining side panels. CAUTION: Never knock nails or drill holes into walls without knowing what is hidden behind them! This may involve plastering, painting or tiling. Typically, the shower will come with a flexible drain hose that will be connected to your drainage point.Īt this stage you should carry out preparatory decoration as necessary. Drainage: The manufacturer’s installation booklet will give measurements for positioning the shower’s drainage point.The rated working voltage of a majority of the Maya Bath steam showers is 220V at 60Hz. Typically, this will be wired back to the consumer box and can be located on a separate breaker switch. Electrical Supply: The 5.0KW steam generators require a 30Amp dedicated power supply to the steam shower.Ball lever valves can be installed to allow quick shut-off of the water to the shower. The water supply pipes should be recessed and not protrude more than ½ inch from the wall. The steam shower will arrive with hot and cold braided hoses on the rear of the unit allowing the unit to be connected and pushed back into position. Water Supply: The manufacturer’s steam shower installation booklet will provide measurements to where the hot and cold feeds should be piped.The steam shower installation will require both a hot and cold water supply along with an electrical feed. Prior to purchasing you should have confirmed the steam shower dimensions and know where in the bathroom you are placing the steam shower.

Fiat steam shower manual